Sonus faber unveils STUNNING next-generation Homage collection
Sonus faber has announced four next-generation Homage collection loudspeakers, updating the iconic range with new innovations for the modern music lover, three decades after Homage’s 1993 debut.
The extension of the current range progresses Sonus faber’s much-loved Italian-made Homage collection, which debuted with the Guarneri (in 1993), and pays tribute to the musical instruments that inspired the collection’s creation. The range honours the genius of the talented creators of musical instruments and the lute-making tradition with its roots in Cremona, Italy.
The four new models include the Guarneri G5 (fifth generation) 2-way standmount, Serafino G2 3.5-way (second gen) and Amati G5 3.5-way (fifth gen) floorstanders, plus the 3-way Vox G3 (third gen) centre channel.
The four Homage models will be available in three luxurious finishes: red, wenge and graphite.
Improved Homage cabinets
The latest computer simulation and testing equipment has improved the cabinets, which now feature class-leading technology, helped by Sonus faber’s 2021 acquisition of the De Santi woodworking facility, its previous supplier of 35 years.
Dramatic improvements have been made to the bracing and porting system, which allow greater efficiency and output while maintaining resonance control. The midrange and tweeter chambers have also seen radical change.
Homage retains the classic iteration of the lute shape, first introduced in the previous Homage Tradition collection, but with modified metalwork including smooth, rounded edges, with a graphite grey anodised finish.
New Intono technology
Intono is a proprietary Sonus faber technology that addresses the drawbacks of ported cabinet and sealed enclosure designs, yet plays to their strengths.
Intono uses a midrange driver ducted into a further sealed enclosure which is tuned just above peak pressure frequency. When the port unloads, or goes below its tuning frequency, the pressure is equalised into the alternate chamber, significantly reducing impedance peaks. The Intono system cleverly offers the benefits of ported and sealed-enclosure designs, in a more efficient system. Intono is available in the Amati G5 and Sefafino G2.
New midrange drivers
The Amati and Serafino models benefit from a new, more efficient 150 mm natural fibre midrange driver with a neodymium magnet, plus a new shorter and wider voice coil for greater control, a faster response and more overall force. The suspension has been improved, too, with optimisation for greater speed and control.
New bass drivers
The Serafino’s bass driver has been updated with a new coil and spider material, optimised for greater air movement and bass extension. The entire system has also been mass-loaded to counterbalance any resonant vibration.
Amati benefits from a new 220 mm bass driver with a 23.6 % increase in force. Two separate ultralight CCAW voice coils are implemented in a custom-formed neodymium Slug featuring two air gaps for maximum speed, with an integrated heat sink for improved power handling; the Finite Element Method was deployed to give the Amati unrivalled bass performance in its category.
Tuning of the Guarneri’s 150 mm driver has led to improvements in control and has tamed resonance right down to 15 Hz. A purpose built neodymium motor system combined with a new tuning frequency, allows for deeper extension without distortion. The entire system has also been optimised, balancing mass to reduce modal vibration.
Homage benefits from Sonus faber’s new hybrid crossover system, which uses the finest components available. The use of the latest simulation software combined with extensive listening trials has evolved Sonus faber’s proprietary Paracross topology and Interactive Fusion Filtering to next-level status.
Hand-selected Jantzen inductors, custom specification Clarity Caps, plus Mundorf capacitors and resistors are hand-soldered on custom PCBs to ensure maximum clarity, high power handling, a low noise floor and long life.
Phase coherent driver array
The new Homage drive units are time-aligned and phase correct on every single driver. This phase coherent driver array not only means greater impact, but considerably better three-dimensional effect for a more immersive sound.
The Homage models feature established Sonus faber technologies, too, including the D.A.D reference tweeter, cellulose pulp midrange cones and sandwich cone mid-bass drivers.
In addition, aluminium ‘dampshelves’ at the top of the cabinet, increase rigidity and reduce resonance, while the proprietary UltraFlex anti-resonance porting system maximises airflow.
Commenting on the new-generation Homage models, Sonus faber’s Chief of Design, Livio Cucuzza said, “The most complex, but also exciting moment for a designer is when he is called upon to improve a timeless icon.”
How do you innovate a product whose image is immune to the passage of time and the changing fashion trends? The only way is to take a step back, reflect and deeply understand why that product was initially created. I faced this challenge straight on with my team at Sonus faber.”
The third generation of Homage was the first product I worked on, and the latest launch we are unveiling is the fifth: the most evolved, the most mature, but equally authentic and special. A story that repeats itself, crossing the evolutionary path in different stages of my own life, never ceasing to fascinate me and make me proud to be part of it.”
Price and availability
Homage is available to order now
Guarneri G5: £13,000 (Guarneri stand: £3,200); Serafino G2: £22,000; Amati G5: £30,000; Vox G3 £14,000